Effect of quality control on the proliferation of the extract from Taraxacum mongolicum Hand.‐Mazz. in Lactobacillus plantarum

In recent years, the fingerprint of high‐performance liquid chromatography has been extensively applied in the identification and quality control of traditional Chinese medicine. It can be a potential protocol for assessing the authenticity, stability and consistency of traditional Chinese medicine and guaranteeing the expected biological activity. In this paper, a method using high‐performance liquid chromatography to identify and control the quality of the extract of Taraxacum mongolicum Hand.‐Mazz. (TME) was established. With this method, the correlation coefficients of the similarity of 10 batches were ≥0.994. The TME displayed a steady proliferative effect in Lactobacillus plantarum. In brief, this study successfully built a reliable, simple and efficient method to control and confirm the quality and the stability of biological activity of the TME.     

RAFM钢TIG焊和电子束焊疲劳性能实验和分析模拟

利用ANSYS 对低活化铁素体马氏体(RAFM)钢进行非熔化极气体保护焊(TIG 焊)与电子束焊的抗疲劳模拟分析，再利用SDS200 电液伺服疲劳试验机对TIG 焊和电子束焊的两种RAFM 钢试件进行实验。通过施加相同梯度负荷对TIG 焊和电子束焊试件进行焊缝的疲劳性能实验。与实验结果对比分析，结果显示电子束焊优于 TIG 焊，但在一定负载下可以用TIG 焊代替电子束焊。     

Analysis of F-53B,Gen-X,ADONA, and emerging fluoroalkylether substances in environmental and biomonitoring samples: A review

The persistent, bioaccumulative, and toxic properties of certain per- and polyfluoroalkyl substances (PFAS) raise concerns for environmental and human health. This has led to the gradual phase-out from production and commerce of some legacy PFAS. Fluoroalkylether compounds (ether-PFAS) are among the fluorinated alternative chemicals that are beginning to be reported in impacted and background environments. Extensive monitoring activities were conducted since 2015–2019 to bridge knowledge gaps on the environmental fate and effects of ether-PFAS including F-53B (6:2 chlorinated polyfluoroalkyl ether sulfonate [6:2 Cl-PFAES] and 8:2 Cl-PFAES), Gen-X (hexafluoropropylene oxide dimer acid [HFPO-DA]), and ADONA (dodecafluoro-3H-4,8-dioxanonanoate). In recent years, advances in nontarget screening using high-resolution mass spectrometry have revealed the identities of other infrequently monitored ether-PFAS. In this critical review, we provide an up-to-date inventory of the structures of ether-PFAS discovered in the recent literature. Their environmental occurrence, fate, and effects are discussed on a comparative perspective with some legacy PFAS such as perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS). Information on the methods employed for the quantitative and semi-quantitative analysis of ether-PFAS is also provided, including sample preparation and mass spectrometry analysis, analytical performance, and limitations. In particular, the compiled database of MS/MS fragment ions (n = 111) can be useful in spectrum interpretation of novel ether-PFAS. The concluding remarks open on possible research avenues and the challenges that remain to be addressed.     

Development of nanomaterial chemosensors for toxic metal ions sensing

Heavy metal ions are harmful to aquatic life and humans owing to their high toxicity and non‐biodegradability, so their removal from wastewater is an important task. Therefore, this work focuses on designing suitable, simple and economical nanosensors to detect and remove these metal ions with high selectivity and sensitivity. Based on this idea, different types of mesoporous materials such as hexagonal SBA‐15, cubic SBA‐16 and spherical MCM‐41, their chloro‐functionalized derivatives, as well as 4‐(4‐nitro‐phenylazo)‐naphthalen‐1‐ol (NPAN) azo dye have been synthesized, with the aim of designing some optical nanosensors for metal ions sensing applications. The mentioned azo dye has been anchored into the chloro‐functionalized mesoporous materials. The designed nanosensors were characterized using scanning and transmission electron microscopy as well as Fourier transform infrared and UV–visible spectral analysis, nitrogen adsorption–desorption isotherms, low‐angle X‐ray diffraction and thermogravimetric analyses. Their optical sensing to various toxic metal ions such as Cd (II), Hg (II), Mn (II), Fe (II), Zn (II) and Pb (II) at different values of pH (1.1, 4.9, 7 and 12) was investigated. The optimization of experimental conditions, including the effect of pH and metal ion concentration, was examined. The experimental results showed that the solution pH had a major impact on metal ion detection. The optical nanosensors respond well to the tested metal ions, as reflected by the enhancement in both absorption and emission spectra upon adding different concentrations of the metal salts and were fully reversible on adding ethylene diamine tetra acetic acid or citric acid to the formed complexes. High values of the binding constants for the designed nanosensors were observed at pHs 7 and 12, confirming the strong chelation of different metals to the nanosensor at these pHs. Also, high binding constants and sensitivity were observed for NPAN‐MCM‐41 as a nanosensor to detect the different metal ions. From the obtained results, we succeeded in transforming the harmful azo dye into an environmentally friendly form via designing of the optical nanosensors used to detect toxic metal ions in wastewater with high sensitivity.     

Rapid and easy quantification of elemental sulphur in aqueous samples from biological reactors: the turbidimetric method revisited

Recent developments in wastewater treatment have led to a renewed interest to obtain elemental sulphur (S°) as a by-product from bioreactors. However, practical studies are limited by the gap of adequate analytical techniques for its determination. This paper provides a statistical study and matrix effect evaluation of an adapted spectrophotometric method for routine S° analyses in aqueous samples, based on a methodology previously described by Hart (1961). Four complex matrices were tested: domestic sewage and effluent samples from three different bioreactors. Tested performance criteria included linearity, matrix effect, limit of detection and quantification and S° recovery. Results were linear (R² = 0.99994) in the studied range (5 to 100 mg S° L^?1) and no matrix effect was observed. The accuracy was based on recovery values that varied from 100% to 106%. The colloidal S° separation and extraction protocol was also considered suitable for aqueous samples, reaching more than 99.0% of S° recovery.     

基于毛竹叶片理化参数的刚竹毒蛾危害检测研究

虫害检测算法研究是开展虫害快速、准确监测，制定精准森防检疫措施的重要基础。以毛竹叶片为研究尺度，基于刚竹毒蛾危害下的寄主外部形态与内部生理现象总结，选择并实测叶损量LL、相对叶绿素含量RCC、相对含水量RWC、原始光谱的733.66~898.56 nm值(ρ_{733.66~898.56})、一阶微分光谱的562.95~585.25 nm值(ρ′_{562.95~585.25})与706.18~725.41 nm值(ρ′_{706.18~725.41})等理化参数，随机划分实验组(63组)和验证组(37组)并设计5次重复实验；分别运用Fisher判别分析、BP神经网络、随机森林等三种方法建立刚竹毒蛾危害等级的检测模型，从检测精度、Kappa系数及R2等指标对模型的检测效果予以分析和比较。结果显示，Fisher判别分析、BP神经网络、随机森林的检测精度分别为69.19%，65.41%，83.78%，Kappa系数分别为0.576 9，0.532 4和0.778 8，R2分别为0.722 2，0.582 6和0.870 9，总体而言，三种方法均具备刚竹毒蛾危害的检测能力，随机森林的检测效果最优，Fisher判别分析次之，再次为BP神经网络；从分等级来看，随机森林的检测精度亦优于Fisher判别分析与BP神经网络，但3种方法对中度危害等级的检测精度均有所不足。该成果可为刚竹毒蛾危害及其他病虫害检测算法的选择提供参考，并为进一步建立冠层、遥感影像像元等尺度的虫害检测模型奠定基础。     

In vitro anti‐proliferative and in silico docking studies of heteroleptic copper(II) complexes of pyridazine‐based ligands and ciprofloxacin

Three heteroleptic copper(II) complexes of the type [Cu(L^1–3)(cf)(ClO₄)] ( 1 – 3 ), where cf = ciprofloxacin, have been synthesized using pyridazine‐based ligands 3‐chloro‐6‐(salicylidenehydrazinyl)pyridazine (HL¹), 3‐chloro‐6‐(4‐diethylaminosalicylidenehydrazinyl)pyridazine (HL²) and 3‐chloro‐6‐(5‐bromosalicylidenehydrazinyl)pyridazine (HL³). Electronic spectral data and magnetic moment values suggest octahedral geometry for the synthesized copper(II) complexes. Electrochemical data of the copper(II) complexes present an irreversible one‐electron reduction wave in the cathodic potential region (E_pc) between ?0.631 and ?0.670 V. Frontier molecular orbital calculations were carried out, and the obtained low‐energy gap supports the bio‐efficacy of the complexes. All the complexes were screened for their in vitro cytotoxicity activity against three human cancerous (breast adenocarcinoma (MCF‐7), hepatoma (HepG‐2) and cervical (HeLa)) and one non‐cancerous (non‐tumorigenic human dermal fibroblast (NHDF)) cell lines using MTT assay, in which complex 2 exhibited higher activity. The apoptosis induction by the complexes was analysed using the Hoechst dye staining method with MCF‐7 cell line, which indicates higher apoptotic activity of complex 2 . A molecular docking study was carried out to ascertain the binding affinity of the synthesized heteroleptic copper(II) complexes with phosphoinositide 3‐kinase gamma (PI3Kγ) receptor.     

Synergistic Surface Passivation of CH3NH3PbBr3 Perovskite Quantum Dots with Phosphonic Acid and (3-Aminopropyl)triethoxysilane

CH₃NH₃PbBr₃ perovskite quantum dots (PQDs) are synthesized by using four different linear alkyl phosphonic acids (PAs) in conjunction with (3-aminopropyl)triethoxysilane (APTES) as capping ligands. The resultant PQDs are characterized by means of XRD, TEM, Raman spectroscopy, FTIR spectroscopy, UV/Vis, photoluminescence (PL), time-resolved PL, and X-ray photoelectron spectroscopy (XPS). PA chain length is shown to control the PQD size (ca. 2.9–4.2 nm) and excitonic absorption band positions (λ=488–525 nm), with shorter chain lengths corresponding to smaller sizes and bluer absorptions. All samples show a high PL quantum yield (ca. 46–83 %) and high PL stability; this is indicative of a low density of band gap trap states and effective surface passivation. Stability is higher for smaller PQDs; this is attributed to better passivation due to better solubility and less steric hindrance of the shorter PA ligands. Based on the FTIR, Raman, and XPS results, it is proposed that Pb²⁺ and CH₃NH₃⁺ surface defects are passivated by R−PO₃²⁻ or R−PO₂(OH)⁻, whereas Br⁻ surface defects are passivated by R−NH₃⁺ moieties. This study establishes the combination of PA and APTES ligands as a highly effective dual passivation system for the synergistic passivation of multiple surface defects of PQDs through primarily ionic bonding.     

Kinetics and mechanism of trichloroisocyanuric acid/NaNO2-triggered nitration of aromatic compounds under acid-free and Vilsmeier-Haack conditions

Kinetics and mechanism of nitration of aromatic compounds using trichloroisocyanuric acid (TCCA)/NaNO₂, TCCA-N,N-dimethyl formamide (TCCA-DMF)/NaNO₂, and TCCA-N,N-dimethyl acetamide (TCCA-DMA)/NaNO₂ under acid-free and Vilsmeier-Haack conditions. Reactions followed second-order kinetics with a first-order dependence on [Phenol] and [Nitrating agent] ([TCCA], [(TCCA-DMF)], or [(TCCA-DMA)] >> [NaNO₂]). Reaction rates accelerated with the introduction of electron-donating groups and retarded with electron-withdrawing groups, but did not fit well into the Hammett's theory of linear free energy relationship or its modified forms like Brown-Okamoto or Yukawa-Tsuno equations. Rate data were analyzed by Charton's multiple linear regression analysis. Isokinetic temperature (β) values, obtained from Exner's theory for different protocols, are 403.7 K (TCCA-NaNO₂), 365.8 K (TCCA-DMF)/NaNO₂, and 358 K (TCCA-DMA)/NaNO₂. These values are far above the experimental temperature range (303-323 K), indicating that the enthalpy factors are probably more important in controlling the reaction.